51-1, Jalan SP 2/2,
Taman Serdang Perdana,
Seksyen 2,
43300 Seri Kembangan,
Selangor, Malaysia.
Previous | 1 / 2 | Next |
24V - 480V / 500V - 575V / 500V - 690V
Mentor MP brings DC drive technology up to date, enabling existing and new DC motors to provide economic and productive service. DC drive technology remains cost effective, efficient and is relatively simple to implement. For new applications DC drive provides many advantages, especially for regenerative and high power applications.
Greater motor field control
Enhanced field control with FXMP25
Enhanced system design
Fast set-up, configuration and monitoring
Retro-fit projects
Ease of migration
Motor Field Control
An external motor field controller is recommended when:
Current ratings
The power ratings for the 480V, 575V and 690V configurations are shown below.
The continuous current ratings given are for a maximum ambient temperature of 40°C (104°F) and an altitude of 1000m (3,300ft). For operation at higher temperatures and altitudes de-rating is required. Overload of 150% for 30s is available with ambient temperature of 40°C (104°F) up to a maximum of 10 repetitions per hour.
230V ratings
MODEL |
AC INPUT CURRENT |
DC OUTPUT CURRENT |
TYPICAL MOTOR POWER |
||
CONTINUOUS |
CONTINUOUS |
150% OVERLOAD |
240Vdc |
||
A |
A |
A |
hp |
||
MP25A4(R) |
22 |
25 |
37.5 |
5 |
|
MP45A4(R) |
40 |
45 |
67.5 |
10 |
|
MP75A4(R) |
67 |
75 |
112.5 |
20 |
|
MP105A4(R) |
94 |
105 |
157.5 |
30 |
|
MP155A4(R) |
139 |
155 |
232.5 |
40 |
|
MP210A4(R) |
188 |
210 |
315 |
60 |
|
MP350A4(R) |
313 |
350 |
525 |
100 |
|
MP420A4(R) |
376 |
420 |
630 |
125 |
|
MP550A4(R) |
492 |
550 |
825 |
150 |
|
MP700A4(R) |
626 |
700 |
1050 |
200 |
|
MP825A4(R) |
738 |
825 |
1237.5 |
225 |
|
MP900A4(R) |
805 |
900 |
1350 |
250 |
|
MP1200A4(R) |
1073 |
1200 |
1800 |
350 |
|
MP1850A4(R) |
1655 |
1850 |
2775 |
550 |
480V ratings
MODEL |
AC INPUT CURRENT |
DC OUTPUT CURRENT |
TYPICAL MOTOR POWER |
||
CONTINUOUS |
CONTINUOUS |
150% OVERLOAD |
@ 400 Vdc |
@ 500 Vdc |
|
A |
A |
A |
kW |
hp |
|
MP25A4(R) |
22 |
25 |
37.5 |
9 |
15 |
MP45A4(R) |
40 |
45 |
67.5 |
15 |
27 |
MP75A4(R) |
67 |
75 |
112.5 |
27 |
45 |
MP105A4(R) |
94 |
105 |
157.5 |
37.5 |
60 |
MP155A4(R) |
139 |
155 |
232.5 |
56 |
90 |
MP210A4(R) |
188 |
210 |
315 |
75 |
125 |
MP350A4(R) |
313 |
350 |
525 |
125 |
200 |
MP420A4(R) |
376 |
420 |
630 |
150 |
250 |
MP550A4(R) |
492 |
550 |
825 |
200 |
300 |
MP700A4(R) |
626 |
700 |
1050 |
250 |
400 |
MP825A4(R) |
738 |
825 |
1237.5 |
300 |
500 |
MP900A4(R) |
805 |
900 |
1350 |
340 |
550 |
MP1200A4(R) |
1073 |
1200 |
1800 |
450 |
750 |
MP1850A4(R) |
1655 |
1850 |
2775 |
700 |
1150 |
575V ratings
MODEL |
CURRENT |
DC OUTPUT CURRENT |
TYPICAL MOTOR POWER
|
||
CONTINUOUS |
CONTINUOUS |
150% OVERLOAD |
|
|
|
A |
A |
A |
kW |
hp |
|
MP25A5(R) |
22 |
25 |
37.5 |
14 |
15 |
MP45A5(R) |
40 |
45 |
67.5 |
25 |
30 |
MP75A5(R) |
67 |
75 |
112.5 |
42 |
50 |
MP105A5(R) |
94 |
105 |
157.5 |
58 |
75 |
MP155A5(R) |
139 |
155 |
232.5 |
88 |
100 |
MP210A5(R) |
188 |
210 |
315 |
120 |
150 |
MP350A5(R) |
313 |
350 |
525 |
195 |
250 |
MP470A5(R) |
420 |
470* |
705 |
265 |
350 |
MP700A5(R) |
626 |
700 |
1050 |
395 |
500 |
MP825A5(R) |
738 |
825* |
1237.5 |
465 |
600 |
MP1200A5(R) |
1073 |
1200 |
1800 |
680 |
900 |
MP1850A5(R) |
1655 |
1850 |
2775 |
1045 |
1400 |
*For this rating at 575V, 150% overload time is 20s at 40°C and 30s at 35°C
690V ratings
MODEL |
AC INPUT CURRENT |
DC OUTPUT CURRENT |
TYPICAL MOTOR POWER |
||
CONTINUOUS |
CONTINUOUS |
150% OVERLOAD |
@ 760 Vdc |
@ 700 Vdc |
|
A |
A |
A |
kW |
hp |
|
MP350A6(R) |
313 |
350 |
525 |
240 |
300 |
MP470A6(R) |
420 |
470* |
705 |
320 |
400 |
MP700A6(R) |
626 |
700 |
1050 |
480 |
600 |
MP825A6(R) |
738 |
825* |
1237.5 |
650 |
700 |
MP1200A6(R) |
1073 |
1200 |
1800 |
850 |
1000 |
MP1850A6(R) |
1655 |
1850 |
2775 |
1300 |
1600 |
* For this rating at 690V, 150% overload time is 20s at 40C ° and 30s at 35C °
Inputs and Outputs
FUNCTION |
QTY |
I/O DEFAULT FUNCTION |
RATING |
Analog input 1 |
1 |
Speed ref 1 |
10V± |
Analog input 2
|
1 |
Speed ref 2 |
10V(default), 0-20mA or 4-20mA± |
Analog input 3 |
1 |
Motor thermistor |
10V, 0-20mA, 4-20mA or Motor thermistor input (default)± |
Analog output |
2 |
Speed feedback output Current feedback output |
10V(default), 0-20mA or 4-20mA± |
Digital input |
3 |
Run reverse input Local/Remote select Jog forward input |
+24V |
Digital input / output |
3 |
At speed output Reset input Run forward input |
+24V |
Relay |
2 |
Drive OK indicator |
Normally closed |
Drive enable |
1 |
Drive enable |
+24V |
+24V External input |
1 |
External 24V supply |
+24V |
Conformance
Humidity 95% maximum (non condensing) at 40°C (104°F)
Ambient temperature -15°C to +40°C (5°F to +104°F), 55°C (131°F) with derating
Altitude: 0 to 3000m (9,900ft), derate 1% per 100m between 1000m (3,300ft) and 3000m (9,900ft)
Vibration: Tested in accordance with IEC 60068-2-64
Mechanical shock tested in accordance with IEC 60068-2-29
Storage temperature -40°C to +70°C (-40°F to +158°F)
Electromagnetic immunity complies with EN 61800-3 and EN 61000-6-2
Notch Immunity to IEC60146-1-1 class A
IEC 61800-5-1 Electrical safety
IEC 61131-2 I/O
EN 60529 Ingress protection
UL508C
EN 61000-6-4 EMC - with optional EMC filters
RoHS compliant
MODEL |
FRAME |
ARMATURE CURRENT (A)* |
FIELD CURRENT (A) |
OVERALL DIMENSION |
OPERATIONQUADRANTS OF |
||||
480V EN / IEC cULus
|
575V EN / IEC cULus to 600V |
690V EN / IEC |
(W) |
(H) |
Depth |
||||
MP25A4(R) |
MP25A5(R) |
|
1A
|
*25 |
8 |
293mm (11.54in) |
444mm (17.48in) |
222mm (8.74in)
|
2 and 4
|
MP45A4(R) |
MP45A5(R) |
|
*45 |
||||||
MP75A4(R) |
MP75A5(R) |
|
*75 |
||||||
MP105A4(R) |
MP105A5(R) |
|
1B |
*105 |
293mm (11.54in) |
444mm (17.48in) |
251mm (9.88in)
|
2 and 4
|
|
MP155A4(R) |
MP155A5(R) |
|
*155 |
||||||
MP210A4(R) |
MP210A5(R) |
|
*210 |
||||||
MP350A4(R) |
MP350A5(R) |
MP350A6(R) |
2A
|
*350 |
20 |
495mm (19.49in) |
640mm (25.20in) |
301mm (11.85in)
|
2 and 4
|
MP420A4(R) |
|
|
*420 |
||||||
|
MP470A5(R) |
MP470A6(R) |
470** |
||||||
MP550A4(R) |
|
|
*550 |
||||||
MP700A4(R) |
MP700A5(R) |
MP700A6(R) |
2B
|
*700 |
495mm (19.49in) |
640mm (25.20in) |
301mm (11.85in)
|
2 and 4
|
|
MP825A4(R) |
MP825A5(R) |
MP825A6(R) |
825** |
||||||
MP900A4(R) |
|
|
*900 |
||||||
MP1200A4 |
MP1200A5 |
MP1200A6 |
2C |
*1200 |
555mm (21.85in) |
1050mm
*** |
611mm (24.06in) |
2
|
|
MP1850A4 |
MP1850A5 |
MP1850A6 |
*1850 |
||||||
MP1200A4R |
MP1200A5R |
MP1200A6R |
2D |
*1200 |
555mm (21.85in) |
1510mm (59.45in) *** |
611mm (24.06in) |
4 |
|
MP1850A4R |
MP1850A5R |
MP1850A6R |
1850* |
*Current ratings are at 40°C with 150% overload for 30s.
**For this rating at 575V and 690V, 150% overload time is 20s at 40°C and 30s at 35°C.
***Height including optional fit exhaust duct cover is 1252mm (49.29in) for size 2C and 1712mm (67.40in) for size 2D.
Keypads and parameter storage
|
Smartcard A memory device that can be used to back-up parameter sets and PLC programs, and copy them from one drive to another |
|
SM-Keypad SM-Keypad is a high brightness LED keypad for Unidrive SP (except frame size 0), Mentor MP and Affinity drives |
|
MP-Keypad MP-Keypad is a multi-lingual, hot pluggable, backlit LCD display |
Automation and Motion option modules
|
SM-Applications Plus SM-Applications Plus offers high performance programmable logic and motion control together with high speed I/O and CTNet, a high speed Fieldbus |
|
SM-Applications Lite V2 User programmable logic and motion control module for standalone drive applications or for when the drive is connected to a centralized controller via I/O or Fieldbus |
|
SM-Register A flexible, high performance solution for programmable motion requiring high speed registration features |
Communication option modules
|
SM-CAN User programmable CAN option module, allows the development of CAN protocols |
|
SM-CANopen CANopen interface supports various profiles including several drive profiles |
|
SM-DeviceNet SM-DeviceNET option module |
|
SM-EtherCAT Follower option module, for high performance servo applications |
|
SM-Ethernet Supports Ethernet/IP and Modbus TCP/IP and can generate emails. Provides high speed drive access, global connectivity and integration with IT network technologies |
|
SM-Interbus Interbus interface option module |
|
SM-LON LonWorks interface for building automation applications |
|
SM-PROFIBUS-DP Follower option module |
|
SM-PROFINET PROFINET is an Ethernet based industrial network protocol adapting Ethernet hardware and protocols |
Input and Output option modules
|
CTNet IO Flexible I/O system for remote connectivity with Control Techniques’ SM-Applications Plus and SM-Register option modules |
|
SM IO 24 V Protected Overvoltage protected I/O module |
|
SM-IO 120 V Module that provides digital I/O rated to 120Vac |
|
SM-IO 32 Extended digital I/O, adding 32 digital high speed bi-directional I/O points to the drive |
|
SM-IO Lite Extended I/O interface with reduced functionality |
|
SM-IO PELV NAMUR standard I/O interface with high speed I/O |
|
SM-IO Plus Extended I/O interface to increase the number of I/O points on a drive |
|
SM-IO Timer Extended I/O option module with real time clock |
Feedback option modules
|
SM-Encoder Output Plus Incremental encoder input and output option module that enables connection with external motion controllers |
|
SM-Encoder Plus Incremental encoder input option module |
|
SM-Universal Encoder Plus Additional combined encoder input and output interface supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI encoders |
Control Techniques Windows-based software packages connect using Ethernet, CTNet, Serial or USB connections. Ethernet communications allow the drives to be accessed remotely, anywhere in the world.
Commissioning and monitoring software
CTSoft - Drive configuration tool for Control Techniques drives CTSoft is a drive configuration tool for commissioning, optimizing and monitoring Control Techniques drives |
|
CTScope - Real-time software oscilloscope CTScope is a real-time full featured software oscilloscope for viewing and analyzing changing values within the drive |
Automation and motion programming software
SyPTPro - System programming toolkit for drive automation systems SyPTPro provides a full featured programming environment for PLC and motion control onboard Control Techniques AC, DC and servo drives |
|
SyPTLite - Fast user program editor for Control Techniques drives SYPTLite is a ladder diagram editor allowing users to develop simple programs for Control Techniques drives and option modules |
Connectivity software
CTOPCServer - OPC compliant server CTOPCServer is an OPC compliant server for interfacing your own PC software with Control Techniques drives |